跳到主要内容

reTerminal 登录系统

串口登录​

9600 波特率

$ sudo minicom -D /dev/ttyUSB0 -b 9600

ssh 登录​

If you want to log in to the Raspberry Pi OS using SSH over Wi-Fi/ Ethernet, you can follow the steps below. First set up Wi-Fi/Ethernet on the reTerminal and then SSH using Windows/Mac/Linux.

Note: If you have configured WiFi and enabled SSH using Raspberry Pi Imager, you can skip steps 1 - 4

  • Step 1. If you have a Wi-Fi connection, click the Wi-Fi icon on the top right corner of the Raspberry Pi OS Desktop, select your Wi-Fi network and enter the password using the on-screen virtual keyboard

Note: The location of the Wi-Fi setting might be different for other OS

  • Step 2. If you don't have a Wi-Fi connection, you can connect an ethernet cable from your router to the ethernet port of the reTerminal

Note: Make sure the reTerminal and your computer is connected to the same network

  • Step 3. Touch on the Raspberry Pi icon at the top left corner and navigate to Preferences > Raspberry Pi Configuration and click on Interfaces tab
  • Step 4. Select Enable which is next to SSH and click OK
$ ssh pi@192.168.1.88

输入密码 raspberry